SPN 27 FMI 3: EGR valve position, voltage high or shorted high
EGR valve position sensor voltage is high. Type another SPN and FMI to check it.
EGR valve position sensor voltage is high.
- Check the valve plug and wiring.
Paste the whole line if you like: "SPN 3251 FMI 0", "3251/0" or Deere's "003251.00". Plain-words guidance; the service manual wins.
What SPN 27 FMI 3 means
EGR valve position sensor voltage is high.
FMI 3: voltage high or shorted high
Signal voltage too high. Usually an open wire, a bad plug, or a wire shorted to power. (SAE J1939-73: Voltage above normal, or shorted to high source.)
How urgent it is
Fix it today. Fix it this shift or today. Left alone it tends to become a derate.
What to check first
- Check the valve plug and wiring.
Plain-words guidance for a foreman, not a repair procedure. Makers add their own codes and steps; the machine's service manual wins.
Other FMIs for SPN 27
| Code | What failed | Urgency |
|---|---|---|
| SPN 27 FMI 2 | erratic or intermittent | Fix it today |
| SPN 27 FMI 4 | voltage low or shorted low | Fix it today |
| SPN 27 FMI 7 | not responding | Fix it today |
| SPN 27 FMI 13 | out of calibration | Fix it today |
Next time, Dozer catches the code when it fires.
Plug a CAN logger into the machine's J1939 port, or connect the telematics you have. When a code fires, Dozer opens a repair ticket with the meaning, how urgent it is and what to check.
- The code, the machine and its hours on one ticket
- Severity sorted: keep working, plan a stop, or stop now
- The mechanic gets the checklist before they drive out
- Repeat codes on the same machine get flagged
LIVE EX-04 · SPN 3251 FMI 0 · plan a stop today Photo is an AI-generated stand-in, not a customer site.
Email me the PDF
We'll send this to you as a PDF, plus a reminder if there's a date in it. One email, no list.
We use it to send this and nothing else. See privacy.
Questions crews ask
What does SPN 27 FMI 3 mean?
EGR valve position sensor voltage is high. FMI 3 means: Signal voltage too high. Usually an open wire, a bad plug, or a wire shorted to power.
Can I keep running with SPN 27 FMI 3?
Fix it today. Finish what's safe to finish, then fix it this shift. Ignoring it usually turns into a derate or a bigger repair. If the machine derates or the stop lamp is on, stop.
What should I check first for SPN 27 FMI 3?
Check the valve plug and wiring.
How do I clear SPN 27 FMI 3?
Fix the cause first. Most codes go inactive by themselves once the condition is gone and the engine has run a key cycle or two. Clearing it with a service tool without a fix only hides it until it comes back.
Which machines show SPN 27 FMI 3?
Any diesel that speaks SAE J1939: excavators, dozers, loaders, haul trucks, generators and on-road trucks with Cat, Cummins, Deere, Komatsu, Volvo, Kubota, Perkins and other engines. The SPN means the same thing on all of them; the fix steps can differ, so check the service manual.
Your site at 6 a.m., before you're there.
Free for one site and one camera. $99 a site after. Crew is always free. 7 days of everything free, no card.