SPN 3242 FMI 0: DPF inlet temperature, above normal, most severe
DPF inlet temperature is way too high. Type another SPN and FMI to check it.
DPF inlet temperature is way too high. The regen may be running too hot.
- Stop working the machine hard.
- Check the doser for dribbling fuel.
- Check the sensor.
Paste the whole line if you like: "SPN 3251 FMI 0", "3251/0" or Deere's "003251.00". Plain-words guidance; the service manual wins.
What SPN 3242 FMI 0 means
DPF inlet temperature is way too high. The regen may be running too hot.
FMI 0: above normal, most severe
Reading is way too high. Treat it as real until you prove the sensor wrong. (SAE J1939-73: Data valid but above normal operational range, most severe level.)
How urgent it is
Fix it today. Fix it this shift or today. Left alone it tends to become a derate.
What to check first
- Stop working the machine hard.
- Check the doser for dribbling fuel.
- Check the sensor.
Plain-words guidance for a foreman, not a repair procedure. Makers add their own codes and steps; the machine's service manual wins.
Other FMIs for SPN 3242
| Code | What failed | Urgency |
|---|---|---|
| SPN 3242 FMI 2 | erratic or intermittent | Fix it today |
| SPN 3242 FMI 3 | voltage high or shorted high | Fix it today |
| SPN 3242 FMI 4 | voltage low or shorted low | Fix it today |
Next time, Dozer catches the code when it fires.
Plug a CAN logger into the machine's J1939 port, or connect the telematics you have. When a code fires, Dozer opens a repair ticket with the meaning, how urgent it is and what to check.
- The code, the machine and its hours on one ticket
- Severity sorted: keep working, plan a stop, or stop now
- The mechanic gets the checklist before they drive out
- Repeat codes on the same machine get flagged
LIVE EX-04 · SPN 3251 FMI 0 · plan a stop today Photo is an AI-generated stand-in, not a customer site.
Email me the PDF
We'll send this to you as a PDF, plus a reminder if there's a date in it. One email, no list.
We use it to send this and nothing else. See privacy.
Questions crews ask
What does SPN 3242 FMI 0 mean?
DPF inlet temperature is way too high. The regen may be running too hot. FMI 0 means: Reading is way too high. Treat it as real until you prove the sensor wrong.
Can I keep running with SPN 3242 FMI 0?
Fix it today. Finish what's safe to finish, then fix it this shift. Ignoring it usually turns into a derate or a bigger repair. If the machine derates or the stop lamp is on, stop.
What should I check first for SPN 3242 FMI 0?
Stop working the machine hard. Check the doser for dribbling fuel. Check the sensor.
How do I clear SPN 3242 FMI 0?
Fix the cause first. Most codes go inactive by themselves once the condition is gone and the engine has run a key cycle or two. Clearing it with a service tool without a fix only hides it until it comes back.
Which machines show SPN 3242 FMI 0?
Any diesel that speaks SAE J1939: excavators, dozers, loaders, haul trucks, generators and on-road trucks with Cat, Cummins, Deere, Komatsu, Volvo, Kubota, Perkins and other engines. The SPN means the same thing on all of them; the fix steps can differ, so check the service manual.
Related free tools
Your site at 6 a.m., before you're there.
Free for one site and one camera. $99 a site after. Crew is always free. 7 days of everything free, no card.