SPN 3242 FMI 4: DPF inlet temperature, voltage low or shorted low
DPF inlet temperature sensor voltage is low: a short to ground or a bad sensor. Type another SPN and FMI to check it.
DPF inlet temperature sensor voltage is low: a short to ground or a bad sensor.
- Check the wiring for a short.
- Replace the sensor if the wiring is good.
Paste the whole line if you like: "SPN 3251 FMI 0", "3251/0" or Deere's "003251.00". Plain-words guidance; the service manual wins.
What SPN 3242 FMI 4 means
DPF inlet temperature sensor voltage is low: a short to ground or a bad sensor.
FMI 4: voltage low or shorted low
Signal voltage too low. Usually a wire shorted to ground or a bad sensor. (SAE J1939-73: Voltage below normal, or shorted to low source.)
How urgent it is
Fix it today. Fix it this shift or today. Left alone it tends to become a derate.
What to check first
- Check the wiring for a short.
- Replace the sensor if the wiring is good.
Plain-words guidance for a foreman, not a repair procedure. Makers add their own codes and steps; the machine's service manual wins.
Other FMIs for SPN 3242
| Code | What failed | Urgency |
|---|---|---|
| SPN 3242 FMI 0 | above normal, most severe | Fix it today |
| SPN 3242 FMI 2 | erratic or intermittent | Fix it today |
| SPN 3242 FMI 3 | voltage high or shorted high | Fix it today |
Next time, Dozer catches the code when it fires.
Plug a CAN logger into the machine's J1939 port, or connect the telematics you have. When a code fires, Dozer opens a repair ticket with the meaning, how urgent it is and what to check.
- The code, the machine and its hours on one ticket
- Severity sorted: keep working, plan a stop, or stop now
- The mechanic gets the checklist before they drive out
- Repeat codes on the same machine get flagged
LIVE EX-04 · SPN 3251 FMI 0 · plan a stop today Photo is an AI-generated stand-in, not a customer site.
Email me the PDF
We'll send this to you as a PDF, plus a reminder if there's a date in it. One email, no list.
We use it to send this and nothing else. See privacy.
Questions crews ask
What does SPN 3242 FMI 4 mean?
DPF inlet temperature sensor voltage is low: a short to ground or a bad sensor. FMI 4 means: Signal voltage too low. Usually a wire shorted to ground or a bad sensor.
Can I keep running with SPN 3242 FMI 4?
Fix it today. Finish what's safe to finish, then fix it this shift. Ignoring it usually turns into a derate or a bigger repair. If the machine derates or the stop lamp is on, stop.
What should I check first for SPN 3242 FMI 4?
Check the wiring for a short. Replace the sensor if the wiring is good.
How do I clear SPN 3242 FMI 4?
Fix the cause first. Most codes go inactive by themselves once the condition is gone and the engine has run a key cycle or two. Clearing it with a service tool without a fix only hides it until it comes back.
Which machines show SPN 3242 FMI 4?
Any diesel that speaks SAE J1939: excavators, dozers, loaders, haul trucks, generators and on-road trucks with Cat, Cummins, Deere, Komatsu, Volvo, Kubota, Perkins and other engines. The SPN means the same thing on all of them; the fix steps can differ, so check the service manual.
Related free tools
Your site at 6 a.m., before you're there.
Free for one site and one camera. $99 a site after. Crew is always free. 7 days of everything free, no card.